The AF-DA021 lets two people share one bed and still pick their own head position. The upper section divides left and right, each half on its own motor, while a third motor lifts the shared foot end. It is the middle tier of the split-head range: the dual-side head control couples want, in a three-motor build that lands at a friendlier price than a five-motor flagship. Offered in split queen, split king, and split cal king, it gives brands a couples base that reaches past the usual king-only options into the queen market.

Split-Head Design for Two Sleepers

The point of a split head is simple. One partner can raise their side to read or cut down snoring while the other stays flat, and neither has to settle for a shared angle. The AF-DA021 puts a motor on each head half and a third on the foot, so both sides of the upper body move on their own but the legs lift together. That shared foot is deliberate, since most couples want the same leg position even when their head heights differ. A wireless remote runs the bed, with memory presets, a flat-position key, and TV and anti-snore modes.

Where It Sits in the Range

A buyer choosing the AF-DA021 wants split-head function without paying for the top model. It keeps the dual head control and adds the comfort features shoppers expect, then leaves off the independent pillow-tilt motors found on the premium tier. That trade lands a lower cost while still doing the main job, separate head positions for two people. The split queen size is the standout here, since a true split queen is harder to find than split king and opens the couples segment to queen-bed buyers.

Everyday Comfort and Smart Options

A wave-and-mode massage covers the head and foot on each side for unwinding before sleep. Charging sits within reach through two USB and Type-C ports by the headboard, and a pair of soft under-bed lights mark the floor after dark. Phone control comes through a Bluetooth app, and buyers wanting a connected build can add sleep tracking and voice command. The base also holds its position during an outage thanks to the backup battery. Padding is a 3-inch EPE foam layer over a fabric-and-plywood deck, dressed in anti-slip black and upholstered linen, and the center-folding zero-clearance frame packs down small for freight and slots into existing bed frames.

Sizing, Build and Certification

The AF-DA021 ships in Split Head Queen, Split Head King, and Split Head Cal King. Leg height adjusts across 3, 6, 9, and 12 inches, with an 800 lb load rating. Certification covers CE, UL, ETL, SAA and FCC alongside Law Label paperwork, plus 15,000-cycle endurance and 16 CFR Part 1633 flammability checks. Warranty runs three years overall with five on the frame, the cover importers expect on a mid-range couples model.

Frequently Asked Questions

What does split head mean on this bed?

The head section divides into a left and right half, each lifting on its own motor, while the foot stays as one shared section. Two people can set different head heights in the same bed without two fully separate bases. The AF-DA021 carries this on all three of its sizes.

How is the AF-DA021 different from a five-motor split-head bed?

It uses three motors instead of five. Both head halves and the foot still move independently, but it does not add the separate pillow-tilt motors of the top model. The result is the same dual-side head control at a lower price, which suits buyers who want the couples function without the flagship cost.

Why choose a split queen instead of a split king?

A split king is the common couples size, but it needs a wide bedroom. A split queen gives the same dual head control in a smaller footprint, which fits more rooms. Since true split queen bases are less common, stocking one can fill a gap most catalogs miss.

Who is this base aimed at?

Two-sleeper households where partners disagree on head height. A late-night reader can prop up one side while the other sleeps flat, and a light snorer can lift their own head a touch without nudging anyone awake. Retailers tend to position it as the practical couples pick a step below the premium tilt models.

Will my mattress move with the split head?

A bendable mattress is the requirement, with foam or latex tracking the motion best. Because only the head divides, a split-top mattress, or two head-end pieces, lets each side angle freely without the surface fighting back. The grippy deck fabric keeps everything from creeping as the halves shift.