The AF-TS0101 brings two handy tricks to a small-size bed: it rolls, and it resizes. Caster wheels let the whole bed glide across a room or pull away from the wall for cleaning, and a telescoping rail lets the same frame switch between Twin and Full width. That suits a child's room where the mattress grows over time, or a guest space that gets rearranged often. The steel construction takes 1000 lbs and accepts a headboard, giving a brand a single, mobile, resizable frame instead of fixed Twin and Full models stocked separately.

Rolls where you need it

What sets the AF-TS0101 apart in this range is mobility. Four caster wheels carry the frame across the floor, so a parent can pull the bed out to vacuum behind it, or a room can be reshuffled, without anyone lifting a thing. In a kid's room or a flexible guest-and-study space, a bed that moves on demand earns its keep. The casters bear the load at floor level and can be set to hold position once the bed is parked, so it glides when wanted and stays planted when not.

Resizes between Twin and Full

A slim inner rail slides within the outer side bar, letting the AF-TS0101 step between Twin and Full widths and lock there. The practical payoff lands in a growing child's room: when a Twin mattress gives way to a Full, the frame widens to match instead of heading to the curb. For a store, that two-in-one span trims the catalog, since a lone adjustable frame stands in for two separate small-size listings, cutting what has to be stocked and shipped.

Steel frame, 1000 lb rating

A square 40 by 40 mm steel side bar anchors the AF-TS0101, with a 20 by 20 mm bar sliding inside it to handle the size change. The rated load reaches 1000 lb, comfortably covering a Twin or Full mattress, an optional box spring, and a sleeper, and the size-lock joints clamp tight to keep the frame from racking. Steel sidesteps the slow sag wood develops, and corner brackets are drilled to receive a headboard, letting the frame headline a full bed rather than just prop a mattress.

Specifications

Size range: adjusts between a 39-inch-wide Twin and a 54-inch-wide Full. Construction: square steel, 40 by 40 mm outer side bar with a 20 by 20 mm telescoping inner bar. Mobility: mounted on caster wheels. Rated load: 1000 lb. Delivery: parcel carrier, not freight. OEM and private-label options cover finish and branding, with orders from 50 units per size.

Frequently Asked Questions

Does the AF-TS0101 move on wheels?

It does. Caster wheels let the entire bed roll across the floor, so it can be pulled out for cleaning behind it or shifted when a room is rearranged, with no lifting. The casters can also be set to keep the bed in place once parked.

Can one frame be used for both Twin and Full?

Yes. An inner rail telescopes within the side bar, so the frame widens from Twin to Full and locks at either. A growing child can move up a mattress size while keeping the same frame, and a store can list one item instead of two.

What is its weight rating?

The frame is built for up to 1000 lb. Square steel bars and tight size-lock joints hold it firm under a Twin or Full mattress, an optional box spring, and a sleeper, whichever width it is set to.

Will it take a headboard?

Yes. Corner brackets are drilled to bolt a headboard onto the frame, so it can front a finished bed. A mattress can sit on it directly or over a box spring, and it keeps the whole setup level and raised off the floor.

Is it a good choice for a kid's room?

It fits that use well. The Twin-to-Full range follows a child as they grow, and the wheels make the bed simple to roll aside for cleaning or play. With steel construction and a 1000 lb rating, it stands up to energetic daily use.